Envision One ERigidForm Charcoal [Pack of 1]

E-RigidForm is a polyurethane-like resin that 3D prints strong, hard and stiff parts that can be used for prototypes and end use.

Available in translucent amber, grey and black, E-RigidForm has high tensile strength (68-73 MPa) that compares with nylon 6 and polycarbonate.  It also delivers good heat deflection and water resistance. With a hardness value of Shore D 87, the same value as a cast urethane plastic, E-RigidForm is a versatile and tough material that is ideal for a wide range of industrial and consumer applications.

Physical properties:-

• Based on Following Post-Cure: UV SCU 2 x 60 min
• Tensile Strength: 68 – 73 MPa
• Elongation at Break: 6-7%
• Tensile Modulus: 2950 – 3250 MPa
• Flexural Strength: 120 – 126 MPa
• Flexural Modulus: 3340 – 3570 MPa
• Hardness, Shore D: 87
• Heat Deflection Temperature @ 1.82 MPa: 62.5°C
• Impact Izod: 30 J/m
• Viscosity: 460 cP @ 30°C
• Water Absorption: 0.67% at 48 hours
• Available colours: Amber, Charcoal